首页 > 新闻动态 > 公司新闻 > Wireless Remote Control Button
新闻动态
公司新闻
行业动态
News
联系我们
深圳Proyu科技有限公司(办公室)                        5#307 Jinfanghua新河2号,河北,坂田街道,龙岗区,深圳 百度地图API的自定义地图   ... 现在联系
认证
认证

新闻动态

Wireless Remote Control Button

Senia Rao www.smart-home-security.cn 2016-04-07 16:25:02


Main technical indicators:

1. Operating voltage: 12VDC (other voltages can be customized)

2. Quiescent operating current: ≤ 6mA

3. Working temperature: -30 ~ +70 degrees

4. Receiver sensitivity:-103dBm

5. Operating frequency: 315MHz, 433MHz special frequency can be customized

6. Controller Size: 68.0mmX48.0mmX19.0mm

Output Mode: This model has three output modes: signal interlocking, signal of non-lock, the signal delay 2 seconds of non-lock (delay time can be customized)

1. Signal interlocking: 1 and 2 connections

A key by remote control, the corresponding relay A suction to keep the merger; press B button, A disconnect relay, and B keys corresponding to relay the merger to maintain suction. Do the same work cycle.

2. Signal Non-lock: 1 and 2 and 3 are not connected

A key by remote control, and A keys corresponding to the relay pull-in, release immediately after the relay off; press the B key, with the B button corresponding to the relay pull-in, release immediately after the break.

3. Signal Delay 2 seconds of non-lock: 2 and 3 to connect

A key by remote control, and A keys corresponding to the merger delay relay suction disconnected after 2 seconds, press the remote control button B, and B keys corresponding to the merger delay relay suction disconnected after 2 seconds. (Delay time can be customized)

This offering relay output has LED work instructions, operation and intuitive, easy to use.

Wireless remote control button can be used for access control system, which can open door by pressing the button. Our access control system includes access control machine, electric lock, power supply, remote control and so on. It is very convenient for us to use it.